Color Coding Yellow SS316L 1 Inch 300 LB Flange Spiral Wound Gasket
What is Spiral Wound Gasket?
Why did we call it SWG ? SWG is a short form of Spiral Wound
Gasket.
These gaskets are fabricated from thin metal strip sandwiched
between layers of non-metallic filler. SWG has alternative spiral
layers of thin metal sheet and filler material as shown in the
image. Here in the cross-section, the blue layers are of metal, and
the black layers are of filler material. As these layers are
wounded in continuous spiral forms, these types of gaskets are
known as spiral wound gasket.
Quick Details
Style | inner ring MAT | winding ring MAT | outer ting MAT | structure |
| Spiral Wound Gasket | 316 SS | 316 SS Graphite | 316 SS | inner ring outer ring winding ring |
| NPS) | Classes
150, 300 | Class 150 | Class 300 | Class 150 | Class 300 |
|---|
| Inch | mm | Inside Diameter | Outside Diameter |
| 1⁄2 | 31.8 | 19.1 | 19.1 | 47.8 | 54.1 |
| 3⁄4 | 39.6 | 25.4 | 25.4 | 57.2 | 66.8 |
| 1 | 47.8 | 31.8 | 31.8 | 66.8 | 73.2 |
| 1 1⁄4 | 60.5 | 47.8 | 47.8 | 76.2 | 82.6 |
| 1 1⁄2 | 69.9 | 54.1 | 54.1 | 85.9 | 95.3 |
| 2 | 85.9 | 69.9 | 69.9 | 104.9 | 111.3 |
| 2 1⁄2 | 98.6 | 82.6 | 82.6 | 124 | 130.3 |
| 3 | 120.7 | 101.6 | 101.6 | 136.7 | 149.4 |
| 4 | 149.4 | 127 | 127 | 174.8 | 181.1 |
| 5 | 177.8 | 155.7 | 155.7 | 196.9 | 215.9 |
| 6 | 209.6 | 182.6 | 182.6 | 222.3 | 251 |
| 8 | 263.7 | 233.4 | 233.4 | 279.4 | 308.1 |
| 10 | 317.5 | 287.3 | 287.3 | 339.9 | 362 |
| 12 | 374.7 | 339.9 | 339.9 | 409.7 | 422.4 |
| 14 | 406.4 | 371.6 | 371.6 | 450.9 | 485.9 |
| 16 | 463.6 | 422.4 | 422.4 | 514.4 | 539.8 |
| 18 | 527.1 | 474.7 | 474.7 | 549.4 | 596.9 |
| 20 | 577.9 | 525.5 | 525.5 | 606.6 | 654.1 |
| 24 | 685.8 | 628.7 | 628.7 | 717.6 | 774.7 |
Thickness
The standard manufacturing thickness for spiral wound gaskets are:
3.2 mm; 4.5 mm; 6.5 mm
(measured across metallic strip not including the filler, which
protrudes slightly beyond the metal).
Manufacturing tolerances
The tolerance of the gasket diameters (d1, d2, d3, d4, s, s1) are
stipulated by ASME B 16.20 and DIN 2632-2638 standards. The gaskets
designed for non-standard flanges meet the recommendations by the
ASME B 16.20.
Dimensions
The dimensions of the standard SWG meet the ASME, BS and EN (DIN)
standards.
Strength of Spiral Wound Gasket
Spiral Wound Gasket is the ideal gasket in the semi-metallic
category. A narrow strip of V-shape metal hoop is spirally wound
under tension with a filler cushion between the lamination of the
metal and is spot-welded at both ends.
This unique construction of a spring-like metal and soft filler
provides gasket excel-lent characteristics.
Resistance to high temperature and high pressures.
Excellent sealability is maintained with comparatively small gasket
area.
Great resilience which allows the gasket to adjust automatically to
change in operating conditions, such as pressure and
These gaskets are extremely popular due to the wide variety of
available styles and sizes.
SWG can be fabricated of any metal which is available in thin strip
and which can be welded; therefore, they can be used against
virtually any corrosive medium.
They can be used over the complete temperature range from cryogenic
to approximately 1093ºC. This type of gasket can be used in all
pressures from vacuum to the standard 2500 pressure class flange
ratings.
Relatively low-density Spiral wound gaskets are used in vacuum
service whereas extremely high-density Spiral wound gaskets are
used in high-pressure service. The density of gasket is nothing but
a number of layers of filler and metal strip in the given width of
the gasket.
Color Coding of Spiral Wound Gasket
Spiral Wound Gaskets are painted in accordance with ASME B16.20 for
easy identification.
Refer to the image given below for the standard marking on gaskets.
